China Good quality Automatic Belt Tensioner (V-belt) Exhaust Fan with Air Outlet Cone with Free Design Custom

Product Description

Automatic Belt Tensioner (V-belt ) Exhaust Fan with Air Outlet Cone

HangZhou CZPT Motor Co.,Ltd  manufactures  completed range of Axial Flow Fans (Duct Mounting) which are in huge demand across the national and international markets. These are ideally used in providing basic ventilation, fume exhaust and elimination of hot spots and can also be used as a roof extractor and bifurcated fan. Our range of axial fans is purposefully manufactured for all the applications and mounting positions in different sizes.

There are varied Fan Blade with different  Materials Cast Alloy Aluminum Blade  , PA with Fiberglass Sythetic materials Blade or Plastic Blades etc.Different fans with varied materials and set-ups , like Fiberglass Housing or Aluminum Galvanzied  Housing 
These Fans are construction sturdily , cast Aluminum alloy impeller dully statically and Dynamically balanced.

GOFEE fans ‘ range is available in:
Size: 450 mm to 1800mm  (18”,24”,36” ,48”,51″,55”, 57”)
Capacity: 1000 CMH to 59000 CMH   
Static Pressure: 0  to 200 Pa (  Bess Lab reports Data are available).

 Venturi effect  of GOFEE  fan can achieve a very high efficiency and reduction of operational costs.

The entire line is tested in our Gofeelab and certified by Bess Lab

Belt Drive (Lower Power Consumption) & Direct Drive Fan(  Less Maintenance and Lower Noise) both avaiable 

Technical Parameter

  MODEL NUM.                            PRODUCT NAME & DESCRIPTION RATED VOLTAGE FAN OUTER SIZE  (W*H*L) without border /With border  (mm) WALL HOLE  SIZE(mm) AIRFLOW
1 GF-36-D-PAZ  Fibreglass shell/housing ,PVC shutter                   36” P.A.G. blade,                    III phase 50/60HZ 0.75KW(1.0HP)  Direct drive 110V  200V 220V  380V,  400V  415V are available  1080*1080*1200/         1180*1180*1200 1090*1090 24989cmh/ 14280cfm
2 GF-48-PAG-HLD-1.1 Fibreglass shell/housing,PVC shutter                             48 ”P.A.G. blade,   Single or III phase, 50/60HZ,1.1kw Belt Drive 1380*1380*1240/         1480*1480*1240 1390*1390 37600cmh/ 22100cfm
3 GF-55-PAG-HLD-1.5  Fibreglass shell/housing,PVC shutter 55”P.A.G blade,  Single or III phase, 50/60HZ,1.5kw Belt Drive 1520*1560*1260/         1620*1660*1260 1530*1560 55200cmh/
4 GF-51-PAG-HLD-1.5  Fibreglass shell/housing,PVC shutter 51”P.A.G blade,   Single or III phase, 50/60HZ,1.5kw Belt Drive 1420*1460*1200/         1520*1560*1200 1430*1470 44300cmh/  26100cfm

 HangZhou CZPT Motor Co., Ltd. Established in 2008, It  is a exhaust fan manufacturer specializing in cooling pad,poultry equipment,evaporative cooling pad,industrial exhaust fan,ventilation fan,axial fan, under the brand name of “GOFEE“.
There are  200 staff members and 20 engineers. Annual production capacity is averagley 50,000 sets exhaust fans, 200,000 sets of motors, 20,000 cubic metre of cooling pad per year. 

Our product range from glassfibre variable speed/fixed speed cone fan, roof fan, cooling pad, air inlet, electrical controller, climate controlling equipment, voltage or speed adjusting motor for fan, disassembly/wholly assembled speed reducer, standard high efficient motor, glassfiber FRP tower, glassfiber product, etc.
New factory is equipped with fan shell CZPT shaping machine, auto fan assembly line, auto motor production line, large pressure equipment, wind tunnel test lab as per AMCA, motor  test  system, terminal test system, cooling pad production system, and etc. The equipment are highly automated with high precision. Production and test process are strictly controlled to guarantee CZPT product in high quality and consistence. We own a technical research center and have a team of talented technical designers and engineers, focus on bettering climate control solution. We have been certified by ISO9001, CCC, CE, SGS and passed BESS LAB Certification.

We obedience ” Zero defect, zero complaints” as the quality objective. And we stick to the principle of ” Quality first, service first” and continuously improve our production to meet the customers’ needs. We’re pleased to get your Inquiry and we will reply and serve you quickly.

Gofee’s ventilation/exhaust fans  were already installed and very favored in Canada,U.S.A and  Thailand,Malaysia,Vietnam,Philippines,Pakistan &Russia etc over 20 countries and regions.

Agriculture climate control systems comprise broilers, layers , swine/hogs &dairy applications and aim to increase productivity ,health &welfare of animals in these intensive farming applications. 

Gofee’s Fan In Disassembled/Assembled  Package& Loading

 Ventilation Fan Manufacturer CZPT Welcomes Your Inquiry and Visit.


What Is a V-Belt?

A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.

Link-type V-belt

A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.

Classical V-belt

A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.

Narrow V-belt

The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.

Banded belt

Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!

Traditional V-belt

Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.

Metric V-belt

Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.

China Good quality Automatic Belt Tensioner (V-belt) Exhaust Fan with Air Outlet Cone     with Free Design CustomChina Good quality Automatic Belt Tensioner (V-belt) Exhaust Fan with Air Outlet Cone     with Free Design Custom